Motor Vehicle Sensors Selling Point Note1: Pls Use the vehicle fitment weve provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order. Note2: No sensor programming Required : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning. Simplified Relearn : OBDII required Installation of TPMS is recommended to be performed only by trained professionals. SPECIFICATION : Replace For Part Number: 4250C275,S180150004 Battery Life: ABOUT 3YEAR Operating Frequency: 433MHz PACKAGE CONTENT : NORMAL PACKET COMPREHENSIVE VEHICLE COVERAGE Installation Process 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. 3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. 4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. Application FOR Mitsubishi Attrage(from 2014-01 to 2022-02) FOR Mitsubishi Eclipse Cross(from 2017-09 to 2023-12) FOR Mitsubishi Mirage(from 2013-02 to 2022-03) FOR Mitsubishi Pajero(from 2014-07 to 2025-01) FOR Mitsubishi Pajero Sport(from 2014-06 to 2016-04) FOR Mitsubishi Pajero Sport III(from 2016-05 to 2024-06) FAQ Q: Frequently of TPMS sensor A: 433mhz Q: Did they tpms sensor need to make program A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning. Q: Relearn Procedure A: Relearn Summary:OBD Relearn Relearn Description 1. Activate all four sensors by reducing tire pressure or with a TPMS tool. 2. Fill the tires to its required pressure. 3. Read all 4 sensors with TPMS tool. 4. Connect TPMS tool to OBD connector. 5. Switch on ignition (engine off). 6. Follow the instructions on the screen. Have a great time shopping!