1、Real Time Measurement: The gloss meter can be measured in real time, that is, just putting on and measuring, no button operation is required 2、QC Judgment Function: The gloss meter has a QC judgment function, which can realize rapid detection. With ambient temperature compensation function, the value is stable, allowing long period calibration 3、USB Transmission: The gloss meter supports USB transmission, which can be operated online with a computer and complete the test report. With aluminum shell and stable base, compact and portable 4、Rechargeable Battery: The gloss meter is a built in rechargeable lithium battery with low power consumption and can last for more than 48 hours on a single charge 5、Scope of Application: Used for appearance gloss test of paint, coating, ink, plastic, paper, ceramic tile, ceramic, stone, metal and electroplating layer Item Type: Gloss Meter Material: Aluminum Alloy Model: LS192 Battery: 1 x Rechargeable Lithium Battery 3.7v 1000mAh (built in battery) Purpose: Sampling and Comparison of Gloss Measurement Scope of Application: Appearance Gloss Test of Paint, Coating, Ink, Plastic, Paper, Ceramic Tile, Ceramic, Stone, Metal and Electroplated Layer Measuring Angle: 60° Measuring Spot: Approx. 9 x 15mm / 0.4 x 0.6in Minimum Size of Test Object: Approx. 20 x 10mm / 0.8 x 0.4in Measuring Range: 0-1000GU Resolution: 0.1GU Repeatability: 0-100GU: ±0.2GU 100-1000GU: ±0.2% of Reading Reproducibility: 0-100GU: ±0.5GU 100-1000GU: ±0.5% of Reading Zero Error: 0.1GU Indication Error: 0-100GU: ±1.5GU 100-1000GU: ±1.5% of Reading Weight: Approx. 300g/10.6oz Battery Capacity: 1 x Rechargeable Lithium Battery 3.7v 1000mAh Display: 192×64 System Language: Simplified Chinese, English Charging Interface: USB (type c) Data Interface: USB Operating Temperature Range: 10~45℃, 0~85%RH (non condensing) Storage Temperature Range: -10~60℃, 0~85%RH (non condensing) Ambient Temperature Compensation Function: Support QC Judgment Function: Support USB Transfer: Support Computer Connection: Support The Standard Board is Dirty, Please Wipe the Standard Board Clean with a Special Lens Cloth, and then Buckle the Host into the Base. The Host is Not Close to the Standard Board, Please Buckle It into the Base Again. When the Ambient Temperature Changes Significantly, the Instrument Temperature and the Ambient Temperature Should Be Close to Each Other, and After Confirming That the Lens in the Test Port of the Instrument and the Standard Plate of the Base Are Not Dew, Restart the Measurement. Light Source Attenuation Causes Malfunction When the Instrument Prompts "Calibration Failed!", You Can Long Press the Button to Skip the Calibration. 4. Measurement (1) Normal Mode If the Instrument is Set to Normal Mode, After the Calibration of the Instrument is Completed, Remove the Base and Place the Measuring Port of the Instrument on the Appearance of the Object to Be Measured, and the Instrument Will Display the Measured Value at That Place in Real Time. Short Press the Button, the Lower Left Corner of the Interface Displays the "Hold" Pattern, and the Measurement Data is Kept on the LCD. if You Need to Measure Again, Press the Button to Cancel the "Hold" State and Return to the "Measuring" State. (2) QC Mode If the Instrument is Set to QC Mode, After the Instrument is Calibrated, Remove the Base, Place the Measuring Port of the Instrument on the Appearance of the Object to Be Measured, and Short Press the Button to Perform the Measurement. After the Measurement, the Measured Value Will Be Judged Whether It is Qualified. the Range of the Upper and Lower Limits Must Be Set by PC Software. for Specific Operations, Please Refer to the "Gloss Meter Software Operation Manual". 5. PC Software Connect to a Computer Via USB, You Can Use the Gloss Meter PC Software. the Software Can Perform Functions Such As Online Measurement, Parameter Setting, Report Generation and Printing. for Specific Operations, Please Refer to "Gloss Meter Software Operation Manual". 1 x Gloss Meter 1 x U Disk 1 x Data Line 1 x Cleaning Cloth 1 x Calibration Report 1 x User Manual