Function: 1. Improved version, amphibious (inside and outside the tank). Incubate the way you want, place it where you want. 2. Simple, practical and convenient shrimp hatching for fish feeding. Easily collect shrimp without cloudy water. 3. The process is very simple, easy to handle and operate, and has a high incubation rate. 4. Made of the highest quality plastic, non-toxic and durable. This is a good and wise choice that you should make. 5. The suitable temperature is 25-28 degrees, can be used directly in the tank. . TOOLS FOR HATCHING ARTEMIA AUTOMATIC INCUB Specification: Item Type: Shrimp Egg Hatching Incubator Material: plastic Weight: approx. 238g / 8.4oz . TOOLS FOR HATCHING ARTEMIA AUTOMATIC INCUB How to use: 1. First, clean water is aerated, then 90% of aerated treated water is injected into the incubator tank, and then about 10g of coarse salt is added to the water in the tank for dissolution beforehand. 2. Connect the aeration pump to the air inlet on the bottom of the incubator, adjust the amount of air to a suitable size, and the suitable temperature will be 28-30. 3. Add about 3-5g of brine shrimp eggs and after about 36-48 hours (depending on the incubation temperature and the quality of the brine shrimp eggs) they can easily hatch. 4. Harvesting operation: After brine shrimp eggs hatch, oxygenation should be stopped and allowed to stand for about 10-15 minutes. The brine shrimp to be hatched sink to the bottom, and the shrimp shells float on the water, and the brine shrimp larvae can be collected from the bottom of the incubator and fed to small fish. . 5. Uneaten brine shrimp larvae should be stored in the refrigerator and frozen. 6. The top entrance of a simple brine shrimp egg incubator is the air supply port. Please adjust the amount of input air by yourself. If the amount of air input is too much or too little, the hatching time and survival rate of brine shrimp eggs will be affected. Please adjust the amount of input air with the air adjustment switch. 7. The air supply port on the top should be connected with a simple check valve, which can effectively prevent water backflow in the incubator and prevent damage to the air pump. 8. It can be mounted in a tank for incubation with a constant temperature in the tank. . TOOLS FOR HATCHING ARTEMIA AUTOMATIC INCUB Package List: 1 x Incubator 1 x outlet pipe 1 x bubble stone 1 x check valve 1 x base 1 x Bottom Air Tube 2 x hanger 4 x suction cup Note: Since tropical fish need to be heated to 25 to 30 degrees in winter, the brine shrimp incubator can be used directly in the aquarium, which promotes hatching and increases survival. Incubation temperature: brine shrimp eggs can be in the range of 7-30 degrees Celsius. Incubation, incubation speed increases with increasing temperature. The appropriate temperature for incubation is 25-30. Salinity: Different types of brine shrimp eggs have different salinity requirements when hatching. Before hatching, place the eggs in fresh water (mineral water can be used) for 30-60 minutes to let the dehydrated eggs absorb the water completely, then transfer the eggs to artificial seawater with 3% salinity for incubation. The use of sea salt is recommended for the preparation of artificial sea water. The reason is that sea salt contains many types of ions that favorably affect the cracking of the shells of the larvae. . TOOLS FOR HATCHING ARTEMIA AUTOMATIC INCUB