Steam Engine Controller Panel Set Professional Efficient Steam Generator Controller Panel with Temperature Sensor 220V Item Type: Steam Engine Controller Panel Set Material: Plastic. Stainless Steel Weight: Approx. 463g/16.3oz Voltage: 220V Power: 3-24KW Size: Approx. 115x103mm / 4.53x4.06in Applicable Scene: Steam Room Applicable Equipment: Steam Generator, Steam Machine Control Time Range(Min): 1～60 or Long Term Display Temperature Range: 6～60℃(43℉～140℉) Control Temperature Range:35～55℃(95～131℉) Key Function and Operation ON OFF: Control system ON OFF button. Press “ON OFF” key to turn on the system, the system will open the solenoid valve and start to feed water, when the water level reaches the required level, the system will start to heat (current temperature). When the water level reaches the required level, the system heating starts (when the current temperature meets the conditions), until the water level reaches the high water level when the solenoid valve closes and stops feeding water, the system enters the Automatic work state, that is, according to the last set temperature and working time to start working automatically, or according to the default set temperature and working time to start The system will start working automatically according to the last set temperature and working time, or start working according to the default set temperature and working time (restarting when the system is powered down) until it needs to be reset. Press the “ON OFF” key again, the system will be shut down manually and enter into the auto drainage state. Press “ON OFF” key again, the system will be manually shut down and enter into automatic drainage, and shut down after the drainage is finished. SET: Temperature and time setting key. The first time you press this key to set the temperature, at this time the digital tube and the left red LED are flashing to show the previous set temperature. When the system is restarted after power down, the default setting temperature of 43℃(109℉) will be displayed, then press “△” or “▽” to set the temperature. Then press “△” or “▽” key to rise or fall to the desired temperature, then press “SET” key to confirm and enter into the time setting, the system has set working time and no working time. The system has two modes of setting the working time and not setting the working time (i.e. long term work), at this time, the digital tube and the red LED on the right side are blinking. At this time, the digital tube and the red LED on the right side are flashing to show the set time in front or the default setting time of the system, which is 45 minutes (restarting after power down), or the countdown time left for the system to work. (when you need to extend the setting time during operation), then press “△” or “▽” key to increase or decrease the time to the desired length, or Press “△” key until the digital tube blinks to show “CH” code, and then press “SET” key to confirm, then the digital tube resumes to show the current temperature, if not confirmed, it will take 3 seconds. If it is not confirmed, it will be confirmed automatically after 3 seconds and the digital tube will resume displaying the current temperature, after which the system will start counting down or working for a long time. After that, the system will start countdown or long time work. The temperature setting range of the system is from 35℃ to 55℃, and the default setting temperature of the system is 43℃ (109℉). The system defaults to a set temperature of 43°C (109°F). When the system is working for a long period of time (i.e. long time), the 5 red LEDs on the right side of the digital tube are all on and the top one is blinking. When the system is operated for a set length of time (i.e., long term), the When the system is operating for the set duration, the timer range is up to 60 minutes, and the default timer is 45 minutes. PAUSE: Pause key. Press this key to pause the heating, the heating indicator light is off, the keep warm indicator light is flashing, only the “ON/OFF” button and “LIGHT” button can be used, other buttons can be used, other buttons can be used. Only “ON/OFF” button and “LIGHT” button can be used, other keys are invalid, if in the countdown state, the timing time to still enter the automatic drainage, shutdown program. If you press the key again, it will exit the pause state. LIGHT: External light switch key. As long as the system has electricity, this key is used as the switch of external light. △:Increase key for temperature and time setting. ▽:Decrease key for temperature and time setting. Panel prompt message: 1) Temperature lower than 6℃(43℉): digital tube display “ -L ”, the message comes from temperature sensor. 2) Temperature higher than 60℃(140℉): digital tube shows “ -H ”, the message comes from the temperature sensor, the