Features: 1. 10.2 to 1.6KW: This pure sine wave solar grid tie inverter converts DC power from solar panels into AC power. Capacity range: 0.2 to 1.6KW. 2. DC to AC Conversion: Supports DC input from 10.8V to 30V and delivers AC output from 180V to 280V. 3. Usage Note: This grid tie micro inverter is designed for small solar systems. It must be used with solar panels only and is not compatible with batteries. 4. Multiple Protections: Includes islanding protection, voltage protection, frequency protection, temperature protection, and current protection. 5. Durable Design: Constructed with high-quality aluminum alloy for extended service life. Specification: - Item Type: Solar Grid Tie Inverter - Material: Aluminum Alloy - Inverter Box Size: Approx. 10 x 7.5 x 3.5cm / 3.94 x 2.95 x 1.38in - Photovoltaic Output (DC): - Input Connector Quantity: 1 Set - Maximum Input Power: 180W - Maximum Input Current: 9.37A - AC Output (AC): - Rated Output Power: 150W - Maximum Output Power: 160W - Rated AC Frequency: 50/60Hz - Output Frequency Range: 50Hz: 47.5 to 52.5Hz / 60Hz: 57.5 to 62.5Hz - Output Power Factor: >0.99 - Efficiency: - Highest Conversion Efficiency: 92.5% - MPPT: Tracking Efficiency: 99.9% - Night Loss: <700mW - Temperature Range: - Operating: -40°C to +65°C (ambient) - Storage: -40°C to +85°C - Waterproof Rating: IP55 - Communication: None - Grounding: The PE terminal of the AC cable serves as the grounding connection; no additional grounding port is provided. Package List: - 1 x Solar Grid Tie Inverter - 1 x User Manual - 1 x AC Cable Notes: - This device must only be connected to solar photovoltaic modules as the input source. - This is a grid-connected power generation device and must be connected to the utility grid. It will only generate electricity when the grid is functioning properly. In the event of a grid failure, the device will automatically stop operation. - Before installation, ensure the open circuit voltage (VOC) and operating voltage (VMP) of the photovoltaic module are within the inverter's specified input voltage range. - Ensure the maximum output power of the photovoltaic module does not exceed the inverter's maximum input power. - The DC power from the photovoltaic modules passes through this device. Disconnect all circuits separately before performing maintenance or disassembly. - Do not cover the device with any objects. Do not open the enclosure. Repairs must be performed by qualified professionals. - When photovoltaic modules are connected and exposed to sunlight, they will supply DC power to the device. Exercise caution during handling. - Install the device in a location protected from direct sunlight, rain, and snow. Avoid installation in gaps between components or areas prone to water accumulation.