Cost effective. Through PCB type fixing of the strip, which does not block the LED strip and allows a seamless connection without poor contact or disconnection. Transparent connectors that do not block the LED strip, allowing a seamless connection that holds your strip firmly in place. Making it easier than ever to enjoy colourful lighting effects. Widely compatible. This connector is only compatible with 8mm width FCOB COB LED strips. 8mm LED connectors are flexible, insensitive to bending or twisting at all angles and will not break. Good compatibility for multi-use scenario compatibility, board-to-wire at will. Choose from board-to-board, wire-to-wire and board-to-wire connections at will. (Please note: Please pay attention to the installation sequence when connecting.) Versatile use. Can extend your 8mm width FCOB strip, FCOB LED strip splicing, corner connection, direct connection to power supply. Please use the connector corresponding to the light strip. LED corner connector for connecting the edges of LED strips, under-counter lighting, vanity mirror lighting, TV background lighting, etc. Easy to install. Easy to operate. No soldering required. Insert the cut strip and the wires to be used into the clear connector in the correct order, use pliers to attach the metal tabs on the clear connector firmly, make sure the installation is secure and connect the controller to the power supply. (When connecting IP65/IP67 waterproof LED strips, the silicon gel must be removed from the surface of the soldering area). Package contents: 14 clear connectors, 5 x 15cm long 20AWG extension cables. Please note: The connectors are disposable and must be broken before the LED strip is pulled out. (This product does not include the light strip, controller or power supply.) Note: The FCOB LED strip can work perfectly even if the mating contacts of the clips do not make contact with the copper traces.