1、PORTABLE AND MULTIFUNCTIONAL: High definition large screen display, compact and easy to carry, can set the temperature and set the storage function of the wind gauge. 2、HIGH EFFICIENCY: Has a quick heating up, and the constant temperature ensures stable working performance as well as high working efficiency. 3、AUTOMATICALLY START COOLING MODE: When not in use, it will automatically start cooling mode when placed on the shelf. 4、LONG SERVICE LIFE: The automatic protection of heating materials (pulse heating) can better maintain the heating unit, handle and wind head to extend the service life of the machine. 5、EASY TO OPERATE: VIsualized operation panel, adjustable air volume and temperature, suitable for dismantling all kinds of chips such as QFP, SOP, PLCC or SOJ. Item Type: Rework Station Material: ABS Color: As shown in the picture Model: BK880 Application: Desoldering of electronic components Host Output Power 550W (maximum) Input Voltage AC230V 50Hz Hot Air Gun Output Power 550W (maximum) Temperature Range 100℃~500℃ Input Voltage AC 230V 50Hz Air Flow Volume 120L/Min Technical Index Show LED Temperature Adjustable Air Volume Adjustable Automatic Cooling √ Heat Protection √ Sleep Mode √ ℃/℉ Switch √ Password Setting √ Default Value √ How to Use: Installation When the new machine is used for the first time, the heat gun bracket must be installed 1. Align the two mounting holes of the handle bracket with the two fixing screw holes on the machine, and tighten the two screws that have been removed. 2. Put the handle assembly on the handle rack and check whether it is suitable. Power Ups Turn on the power and turn on the main power switch on the back panel of the machine. When the heating switch is not turned on, the screen displays the standby state "---" Work Turn on the heating switch, the screen displays the actual working status. Stop Working Turn off the heating switch and the machine stops heating, then the machine is in the standby state "---". Shut Down After using the hot air gun, please put the handle of the hot air gun on the handle frame, and turn off the heating switch after the hot air drops to sleep. This will greatly extend the service life of the hot air gun. If the whole machine does not need to work, please turn off the heating switch and turn off the main power switch on the rear panel of the machine. Sleeping State of Desoldering Station When the desoldering station is not used for the time being, please place the handle of the desoldering station on the support until the dormancy time is set, the host will automatically cut off the desoldering station heating and enter the dormant state "---". Wake up the desoldering station to sleep After the desoldering station enters the dormant state, just pick up the handle again, the screen displays the working state, and resumes the previous settings. 1 x Host 1 x Power Cord 1 x Air Gun Holder 2 x Nozzle 1 x Manual