Easy to use: first remove the wire jacket (9~10mm), simply push the orange clip slightly upwards 90, insert the cable and turn off the switch, instead of traditional electrical tape and offset end-to-end connectors, technological innovation. Wiring time reduced by 70%. Convenience: These 3-port and 6-port wire connectors are suitable for hard and flexible wires. You can use them to control multiple lights with just one switch, 3 inputs 6 outputs. Widely used - Universal connector: suitable for 0.08-4mm/28-12 AWG solid wire and flexible wires from 0.08 to 2.5 mm/28-14 AWG. It is widely used in building wiring where the space required for all connections is limited. Reusable: Each connection terminal has a sensing connection and can also be recycled. Each connector has an independent spring, different wires are managed separately, and different wire diameters can be connected safely. There is a test hole on the surface of each connector. Tip: The bilateral terminals of the pressure rods are connected to the positive pole, negative pole and ground of the power supply respectively. Rated current: 32A; nominal voltage : 250 V. Note: The data are all measured manually. Due to differences in light and display, please allow 1-3cm error. Please refer to the actual item received.