H743 SLIM V3 Flight Controller 5V 2A BEC ICM42688P Support ArduPilot/BetaFlight/INAV Firmware for RC FPV Freestyle Drone

€84.00
+ €5.49 Shipping
  • product image
  • product image
  • product image
  • product image
  • product image
H743 SLIM V3 Flight Controller 5V 2A BEC ICM42688P Support ArduPilot/BetaFlight/INAV Firmware for RC FPV Freestyle Drone

H743 SLIM V3 Flight Controller 5V 2A BEC ICM42688P Support ArduPilot/BetaFlight/INAV Firmware for RC FPV Freestyle Drone

  • Brand: Unbranded
Sold by:

H743 SLIM V3 Flight Controller 5V 2A BEC ICM42688P Support ArduPilot/BetaFlight/INAV Firmware for RC FPV Freestyle Drone

  • Brand: Unbranded

€84.00

Save €45.00 (34%)

RRP

€129.00
In stock
+ €5.49 Shipping
Sold by:

€84.00

Save €45.00 (34%)

RRP

€129.00
In stock
+ €5.49 Shipping

We accept the following payment methods

Description

H743 SLIM V3 Flight Controller 5V 2A BEC ICM42688P Support ArduPilot/BetaFlight/INAV Firmware for RC FPV Freestyle Drone

MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash ICM:42688P Baro: for Infineon DPS368 (I2C2) OSD: AT7456E (SPI2) Blackbox: Micro-SD card socket (SDIO) 7x Uarts (1,2,3,4,6,7,8) with built-in inversion. 13x PWM outputs(including "LED" pad) 2x I2C 1x CAN 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 1x SPI3 breakout USB Type-C(USB2.0) 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4) 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G) Dual Camera Inputs switch 5V/Vbat filtered power ON/OFF switch for DJI FPV OSD is supported by any spare UART Power Vbat Input: 6-36V (2-8S LiPo) BEC: 5V 2A cont. (Max.3A) LDO 3.3V: Max.200mA No Current Sensor built-in ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K) Static power: 200mA 5V with Betaflight, 150mA 5V with ArduPilot FC Firmware ArduPilot(ChiBiOS): MATEKH743 BetaFlight: MATEKH743 INAV: MATEKH743 Color: Blue Material: PCB Package Contents: 1 x H743-SLIM 5 x Silicon grommets M4 to M3 1 x JST-SH1.0_8pin cable, 5cm 1 x JST-SH1.0_8pin connectors 1 x JST-GH-4P to JST-GH-4P cable for CAN port, 20cm
  • Fruugo ID: 445545195-935717459
  • EAN: 4714060609405

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Manufacturer Part Number: I500876959
Serial Number: I500876959

Delivery & Returns

Dispatched within 24 hours

  • STANDARD: €5.49 - Delivery between Mon 15 December 2025–Tue 23 December 2025

Shipping from China.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy

Product Compliance Details

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • Shenzhen Haoyouqu Electronics Co., Ltd.
  • Shenzhen Haoyouqu Electronics Co., Ltd.
  • Tian'an Community
  • Shatou Subdistrict
  • Futian District
  • shenzhen
  • CN
  • 518000
  • wiodjhjil@outlook.com
  • 865320490316

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • 0utong GmbH
  • 0utong GmbH
  • Brehmstr, 56,40239 Duesseldorf
  • Düsseldorf
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698