1、Convenient and Practical: The poe switch supports POE (802.3af) and POE (802.3at) devices, with a POE power budget of 60W, and can power access points, VoIP phones, and IP cameras through existing Ethernet cables 2、1.2 Gbps and Auto Detect: The poe switch provides 1.2 Gbps switching capacity to support edge network installations. Automatically detect and identify standard compliant powered devices and supply power 3、6 Ports: The poe switch provides 4 PoE high speed data ports and 2 UPLINK uplink ports. Support Extend network to extend the signal, and the transmission can up to 250 meters at the same time 4、Supported Functions: All ports support Auto MDI MDI X function, support IEEE802.3X full duplex flowing control and Backpressure half duplex flowing control, and all ports have wire speed forwarding capability 5、Metal Enclosure and Fanless: Compact, lightweight metal enclosure designed for desktop mounting, and fanless ideal for quiet environments where quiet operation is required Item Type: Poe Switch Material: Aluminum Alloy IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Standards: Support IEEE 802.3at/af Compliant Powered Device (PD): Supported Compliant with Certified Non Standard Powered Devices (PD): Support Store and Forward: Support Media Access Control Automatic Learning and Aging: Support IEEE802.3X Full Duplex Flowing Control and Backpressure Half Duplex Flowing Control: Support Port: 100M POE: 4 1000M Cascading RJ45: 2 Performance: Store and Forward: Support Exchange Capacity: 1.2G Media Access Control Address Table: 2K Use Environment: Working Temperature: 0℃ to 40℃ Storage Temperature: -40℃ to 70℃ Working Humidity: 10% to 90% RH Non Condensing Storage Humidity: 5% to 90% RH Non Condensing POE Standard: Standard IEEE802.3af/at Single Port Maximum Power 30W, The Whole Machine Maximum Power 78W: Support Overcurrent, Overvoltage, Short Circuit Full Protection: Support High Power PD Soft Start: Support Sequential Boot: Support Certified Non Standard PD Power Receiver: Supported Supported Standards and Protocols: IEEE 802.3 Ethernet Media Access Control Protocol: Supported IEEE 802.3i 10BASE T Ethernet: Supported IEEE 802.3u 100BASE TX Fast Ethernet: Supported IEEE 802.3af Power over Ethernet Devices over Ethernet Data Pairs or Devices: Supported IEEE 802.3at Realizes High Power Supply of Ethernet Equipment through Ethernet Data Line Pairs or Equipment: Support IEEE 802.3x Flowing Control: Support Default System Mode: Ordinary Switch, VLAN Isolation, 250M Transmission Data Transfer Rate: Ethernet 10Mbps Half Duplex, 20Mbps Full Duplex. Fast Ethernet 100Mbps Half Duplex, 200Mbps Full Duplex Network Medium: 10Base T: 2 to 3 (Cat3) or Above UTP/STP (≤100m) 100Base TX: 2 Pairs of Category 5 (Cat5) or Above UTP/STP (≤100m) 1 x Poe Switch 1 x Power Cord 1 x User Manual