1、LIQUID CRYSTAL DISPLAY: 2.4in 320X240 TFT LCD with clear graphical interface, 100MHz high accuracy frequency meter and 32 bit counter 2、TECHNICAL PARAMETERS: Sampling rate 200MSa/S, vertical resolution 13 bits, storage depth for 8k, built in 5 basic waveforms and 32 arbitrary waveforms 3、WAVEFORM STORAGE: Support internal storage of 50 groups of user defined edited waveform, pulse wave output set at the edge time 4、INTERNAL EXTERNAL MODULATION: Internal AM, FM, PM modulation function (external AM, FM, PM modulation is optional). Internal or external ASK, FSK, PSK modulation function 5、INDEPENDENT OUTPUT: Dual channel output, maximum output frequency 60M, output linear or logarithmic sweep frequency and burst (pulse train) waveform. The two channels are independent of each other, with phase synchronization function 6、INTERFACE SETTINGS: Standard USB device interface, optional external analog modulation interface, with a multifunctional arbitrary waveform editing software Item Type: Signal Generator Model: ET3320C Sine Wave: 1μHz to 20MHz Square: 1μHz~15MHz Triangle: 1μHz to 15MHZ Pulse: 100μHz~6MHz Arbitrary: 1μHz to 6MHz Frequency Resolution: 1μHz Frequency Accuracy: ±20ppm Frequency Stability: ±1ppm/3 hour Power Supply: Power: <15W Display Screen: Type: 2.4in TFT LED Resolution: 320x240 Color: 16M color State: Temperature Range: Operating Time: 10℃~+40℃; Idle : -10℃~+60℃ Cooling Method: Natural cooling Humidity Range: Below +35℃: ≤90% Relative humidity; +35℃ ~ +40℃: ≤60% Relative humidity Interface: USB device 1 x Signal Generator 2 x Test Clamp Wire 1 x Plug 1 x Connecting Wire 1 x USB Cable 1 x User Manual