The TM Handheld Replicator is a device used to produce the same card number as the mother card, with a mini flat case, ergonomic, easy to carry. The use of advanced chip, all work is completed by this chip, making the product more integrated, more stable and reliable. The excellent program algorithm and circuit design are used to reduce the power consumption of the product, and the design of one read and one write is adopted to make the operation simpler Can copy ID(EM4100) card,TM card. NOTE: 1. When reading, the machine does not have any trigger,indicating that the card is not supported. 2. When writing, the red light "ERROR" appears, indicating that the write failed. Frequency:125KHz Distance:The keychain can read and write up to 25mm Agreement:Reproducible low frequency lD card TM card Card:Supports writing T5577 EM4305 CET5200 And all T5577 compatible RW1990 cards LOW-FREQUENCY ID card(EM4100) copy: 1. Put the master card to the RFlD125KHZ induction position, and the device automatically recognizes and emits a"di" sound,indicating that the reading is successful. 2. Remove the female card, the device enters the WRITE state, and the write indicator is on.Complete the write process within the valid time. Otherwise, the standby card reading mode is automatically reset. 3. Put a new copy card into the induction area, make a "di" sound and "OK" indicator light up, indicating that the write is successful. TM CARD REPLICATION: 1. Place the master card in the sensing area of the TM probe.When the probe makes a"di"sound, it indicates that the reading is successful. 2. Replace a new copy- card, put it in the TM card sensing area, and then make a "drip" sound and "OK" indicator light up, indicating that the write is successful. Colour:Black Material:PCB Package Contents: 1 * TM RFID Duplicator Copier 1 * USB cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.