Comprehensive Vehicle Coverage Installation Process 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation. Insert the tire tool and lift the tire bead onto the mounting ledge. 3. Dismount the sensor: Use a screwdriver to remove the fastening screw and sensor from the valve stem, then loosen the nut and remove the valve. 4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut to 4.0 Nm using the positioning pin. Attach the sensor body to the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, ensuring the valve is positioned 180 degrees from the tire separation point. Mount the tire over the rim. Specification Replacement Part Number: 529333V100O Color: Black Material: ABS Size: 7.5 x 6.5 x 3.5 cm Package Contents: 1 x Tire Pressure Sensor Note 1: No sensor programming required. The tire pressure sensor is and pre-programmed for your vehicle's make, model, and year. Activation via scan tool or relearn procedure is required. Simplified Relearn: AUTO Relearn TPMS installation should only be performed by trained professionals. Package includes only the items listed above. Other products are not included. Note: Lighting and display differences may cause slight variations in color between the product image and the actual item. Measurement error allowance is +/- 1-3 cm.