_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ [Product target features] _x000D_ _x000D_ The ideal companion for small gasoline power tools such as lawn mowers, brush cutters, hedge trimmers, etc., saves you the trouble of picking up the iron buckets and going to the gas station to buy oil. You can pump gasoline from the car into the lawn mower with a few strokes. . _x000D_ _x000D_ [Use] _x000D_ Pumping oil from the car into the oil drum _x000D_ Extracting oil/gasoline from the oil drum _x000D_ Pumping from one car to another _x000D_ _x000D_ [Operational Precautions] _x000D_ 1. When sucking oil, try to keep the oil outlet of the oil suctioner lower than the oil inlet, so that after sucking out the oil, you can stop the twitch and the oil will continue to flow out automatically. _x000D_ 2. After each time the gasoline is cleaned and cleaned, please inject a small amount of oil into the suction port of the pump to keep the lubrication between the suction barrel and the rubber ring for the next use. This can effectively prevent the oil plug from wearing and prolong the oil absorption. The service life of the device. _x000D_ 3. This product is not suitable for the extraction of lubricating oil or other highly viscous, semi-liquid liquids. _x000D_ _x000D_ Instructions for use _x000D_ 1. Place one end of the two red hoses F in the two black fixing sleeves A, respectively. _x000D_ 2. Insert the red hose F with the fixed sleeve into the upper and lower ports of the red pump body C, and tighten them. _x000D_ 3. The red hose of the upper port of the pump body (one end of the handle) is inserted into the container for discharging liquid, and the red hose connected to the lower port is connected as an outlet to the container for injecting liquid. _x000D_ 4. Pull the handle to fill the pump body with liquid. Usually, only pull the pump 4-5 times to make the red hose flow out. You don't need to pull the handle again. The oil pumper will automatically siphon (this applies to the liquid high to low position). If the liquid is pumped from the low position to the high position, the handle should be pulled continuously until the required liquid capacity is obtained. _x000D_ 5. Connect the black valve to the black thick tube E, which can be used as a pump. _x000D_ 6. Insert the connector B into the pump outlet and insert the thin black tube D into the connector B sleeve for use as a charge. _x000D_ _x000D_ Packing list _x000D_ _x000D_ Package includes: _x000D_ 1*oil suction pipe _x000D_ 1*oil outlet pipe _x000D_ 1*extension tube _x000D_ 1*air cock _x000D_ 1*air valve _x000D_ 3*connecting pipe set _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_