Wire connection strength (body outlet end): 20N.10S tension applied axially along the terminal 20N-10S tension applied vertically along the terminal (no damage to the connection) Water pressure resistance: hydrostatic pressure at 1.05MPa open for 5 minutes (no leakage and breakage) Drop performance: from a height of 50cm in any direction to the concrete once (after the test action is normal, no damage) Model: MW-WS-S2 Interface size: 2 points quick connect Starting flow: S2 type:Less than 300ml/min(other flow can be customised) Response time:Less than 1S Switch type: normally (broken) open Wire length: 50cm Segment type: XH-2 Voltage range: 0-110VDC Maximum closing current: 0.5A Support power:Less than 5W On-resistance: 0.12Q Disconnect resistance: 1012Q Connecting capacity: 0.2PF Applicable environment: Applicable water quality: turbidity Less than 1; Fe+Co+Ni Less than 0.3Mg/L Applicable water pressure:Less than 0.8MPa Applicable water temperature: 5-50℃ Ambient humidity:Less than 85 per cent Storage temperature: -20-50℃ Due to different batches, there may be differences in product appearance and printed text, which will not affect use. Colour:As Shown Material:Plastic Package Contents: 1 * quick-connect water flow switch