Features COMFORTABLE AND EFFICIENT: The ergonomic design of the fiber optic stripper handle provides a comfortable grip, reduces hand fatigue during use and ensures an efficient stripping process MULTI FUNCTIONAL DESIGN: Multi port interval design, one clamp to handle bare fiber, pigtail or jumper, indoor or outdoor rubber covered wire. Supports cutting aramid fiber wire and reinforcing steel wire APPLICABLE SPECIFICATIONS: Fiber optic cable stripper is suitable for 1~2 cores section(3.0x2.0)mm with metal or non metal reinforcement wing rubber covered wire ADJUSTABLE OPENING: This fiber optic stripping pliers is fitted with a 1.5mm hex wrench for accurate tuning and can be adjusted as needed for high performance APPLICABLE SCENARIO: This fiber stripper is suitable for use in FTTH and industrial fiber networks, including FTTX, FTTB and FTTP systems, a practical tool for professionals in the field Specification: Model: G5 Material: Stainless steel and PVC non slip Optical Fiber Coating Diameter: 250um Optical Fiber Cladding Diameter: 125um Specifications: 1-2 Cores section(3.0x2.0)mm swing rubber covered wire with metal or non metal reinforcement Scope: Large Mouth: The outer protective casing of the optical fiber can be peeled off (2-3 mm) Middle Mouth: Can peel the medium (600~900) μm soft adhesive protective layer Small Mouth: The dia 250μm coating can be stripped to 125μm cladding Side Cutting Mouth: Can cut the outdoor rubber covered wire external reinforcement steel wire PH: Scissible section (3.0x2.0) mm indoor or outdoor wing (8 figure) rubber covered wire with metal or non metal reinforcement Serrated Mouth: The aramid fiber in the jumper can be cut How to Use: Jaw Adjustment Method: 1. Loosen the fixing screw on the back of the pliers CCW with a 1.5mm hex wrench. 2. Use A 1.5mm hex wrench to adjusting screw to adjust the size of the jaws when pinching, CW twisting will make the jaws larger (such as when the fiber is broken), CCW twisting will make the jaws smaller (such as when the stripping is not tidy). (It is recommended to adjust 1/4 or 1/2 turn, strip the bare fiber test until the strip is tidy and continuous) 3. After adjusting the jaws, tighten the fixing screw CW. Package List: 1 x Fiber Optic Stripper 1 x Opening Adjustment Wrench Package List 1 x Fiber Optic Stripper 1 x Opening Adjustment Wrench