1.Post-operative immobilization or ROM control for the elbow; Conservative treatment of elbow dislocation or luxation2.Stable or internally fixed fractures of the distal humerus or proximal radius or ulna & Immobilization of the elbow in 10~15 increments;Limit ROM by adjustable simple setting hinges3.Breathable laminated soft foam material offers air permeability and moisture vapor transport.4.Transcendent overall adjustability; Simply press and rotate settings; One push bottom can be released for length adjustment5.It is widely used in American hospital system, Food and Drug Administration (FDA) Registered. And FSA or HSA Eligible.Indications:1.Post-operative immobilization or ROM control for the elbow:Elbow reconstruction; Ligament and tendon repairs; Surgical repair of a fracture and biceps repair2.Stable fractures3.Mild to severe soft tissue injuries4.Conservative treatment of elbow dislocation or luxationFeatures:1.Transcendent overall adjustability2.Easy to adjust ROM hinge with lock-out capability, Extension limitation at: 0, 15, 30, 45, 60, 75, 90, Flexion limitation at: 0, 15, 30, 45, 60, 75, 90, 105, 1203.One push bottom can be released for length adjustment4.Length adjustments: 13.5-17 (34-43cm)5.Breathable laminated soft foam material offers air permeability and moisture vapor transport.Instructions For Use1. Locate the hinge pivot center over the lateral humeral epicondyle (outer elbow) to assess length.2. To adjust length, push toggle switch on the upright and pull the cuff away from the elbow hinge to the desired length3. The lower extension (forearm part) should extend up to the styloid process (wrist). The upper extension (upper arm part) should extend up to the most comfortable position at the axilla or arm pit.4. Push switch back to lock it.5. Secure the straps, starting with the two straps closest to the elbow6. If necessary, you should trim the strap for secure fit. Remove the hook piece, trim the strap and reapply the hook piece.7. Side bars may be bent to fit individual anatomic contour. Side bars must be bent til final length adjustment completed.