Specifications: 1) Distance: 50-150 meters 2) Mini size: 5.5cm x 4.5cm x 1.0cm 3) One receiver can work with 400 codes 4) No interference with other remotes and receivers 5) Selector: With 8 dip switches, users can make different combinations for different remotes Input Selector: This receiver can work at AC/DC 9V~30V. It is recommended to adjust the PIS according to the input. If the input is greater than 24V, short pin 2; short pins 1 & 2 if input is less than 24V Color: white + black Material: ABS Programming a new remote: 1) Select the correct brand for the remote to be programmed by moving dip switches UP or DOWN. For example, for 433.92MHz Marantec remote controls, move Dip-switch 7 UP 2) Press the learn button. The LED will turn on 3) Press the button on the remote. The LED flashes 4 times, indicating the remote control was programmed successfully 4) Repeat step 2 for another button 5) The second channel programming procedure is the same Erase all data from the memory: Press and hold either learn button. The LED will flash. Keep the button pressed until the LED turns off. All saved data in the memory will be erased permanently and cannot be recovered Compatibility: All 433.92MHz fixed code remotes Package Contents: 1 x Receiver 3 x Remote Control Only the above package content, other products are not included Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The measurement allowed error is +/- 1-3cm