[Product name]: independent positive and negative poles with single input and multiple output fuse box with LED indicator [12 inputs and 12 outputs] Model of productCS-1469B1 [product net weight]: 279g [Product gross weight]: 285g Product size: 138.25 x 85 x 36.5mm [Product material]: PBT body, PC waterproof and dustproof cover, nickel-plated copper connection terminal, sticker PPX40 [Rated input voltage]: 32 V [Rated input current]: 100 A Maximum output current: 30 A for each circuit [Indicator color]: red [Main terminal]: M5 threaded stud Main Thread: #4-6 [Single line terminal]: M4 threaded stud Single line wire: #12-16 [Indicator function]: When the red LED light is on, it means the fuse has been disconnected and the fuse should be replaced in time to keep working. [Product installation range]: It can be installed on cars, villas, motorhomes, buses, yachts, boats, etc. [Product use range]: It can be directly connected to any electrical circuit on the car/boat [such as: ceiling lights , car headlights, wide lights, fog lights, warning lights, car refrigerators, car chargers, car fans, car TV, etc.] [Accessories of product]: sticker X2, self-tapping screw X4, safety plug X6 20A, safety plug X6 15A, safety plug X6 10A. [Fuse function] : When the circuit breaks down or is abnormal, the current continues to increase, and the increasing current may damage some important or valuable devices in the circuit, or burn out the circuit or even cause a fire.Fuses protect electronic equipment against overcurrents and can also prevent serious injury caused by internal faults in electronic equipment. Therefore, there is a rated specification on each fuse, and the fuse blows when the current exceeds the rated specification. If the fuse is correctly placed in the circuit, the fuse will fuse to cut off the current when the current rises abnormally to the upper limit height and the upper limit temperature, thereby protecting the operation of the circuit. < /p> [Product Benefits]: [1] The product is made of high and low temperature resistant anti-flame retardant PBT material, which meets the requirements of [the fuse holder has good mechanical strength, insulation, heat resistance and flame retardancy, and should not not be broken, deformed or damaged during use Combustion and short-circuit phenomena] conditions 2 All bus bars and fuse clips are made of nickel-plated copper, with corrosion resistance and excellent electrical conductivity 3All fasteners are made of stainless steel.The inlet and outlet ends of the fuse box are fixed with set screws, which can be installed more quickly, and the fuse box fuse box is fixed with self-tapping screws, which makes installation easier and safer. [4] The product has a red LED indicator design, which corresponds to each electrical appliance connected to the fuse. When the fuse is disconnected, the red indicator lights up, and you can immediately know which fuse is broken, which is convenient for timely processing. [5] The product comes with a sticker, which can be attached to the electrical appliance we connected according to the name on the sticker. When the fuse is broken and the red light is on, we can quickly identify which electrical appliance has a problem, saving time and effort [6] The product comes with a double fuse. When used, the fuse is burned out and can be replaced immediately from the spare fuse, and the fuse is sent to multiple Abe, and the fuse for Abe can be selected according to the current electrical applianceNote: The data are all manual measurement, please allow 1 - 3cm error, due to the difference in light and display, there will be a certain color difference, depending on the physical object receipt Delivery quantity: (according to the main picture)