Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: ±10% Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Operating Temperature: 90°C Operating Ambient Temperature: -40°C to 60°C Maximum Current Consumption: 4 mA Power Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in separators, dryers, gas tanks, drip legs, and other compressed air system components. Helps clean the compressed air system after installation. Installation Notes: - Observe correct flow direction during installation; outlet must not be blocked. - Do not use hoses that cannot withstand air pressure. - Ensure power supply voltage matches the drain valve requirements. - When using DC power, connect to terminal "1". - Wire connections: Brown wire is L (live), blue wire is N (neutral), yellow-green wire is safety ground (GND). - Securely tighten the terminal box screws to prevent water ingress. Warning: - Ensure compressed air system is fully depressurized before installation. - Disconnect power supply before wiring. Color: Gold + Black Material: Metal Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: The package includes only the items listed above. Other accessories are not included. Lighting and display settings may cause slight color variations between the product image and actual item. Measurement error allowed: ±1–3 cm.