Automatic Water Level Control Valve Tower Floating Tank Ball Valve

26,92 €
+ 7,43 € Αποστολή

Automatic Water Level Control Valve Tower Floating Tank Ball Valve

  • Μάρκα: Unbranded
Πωλήθηκε από:

Automatic Water Level Control Valve Tower Floating Tank Ball Valve

  • Μάρκα: Unbranded

26,92 €

Αποθήκευση 6,20 € (18%)

Συνιστώμενη τιμή

33,12 €
Σε απόθεμα
+ 7,43 € Αποστολή
Πωλήθηκε από:

26,92 €

Αποθήκευση 6,20 € (18%)

Συνιστώμενη τιμή

33,12 €
Σε απόθεμα
+ 7,43 € Αποστολή

Δεχόμαστε τους ακόλουθους τρόπους πληρωμής

Περιγραφή

Automatic Water Level Control Valve Tank Tower Floating Ball Valve Q81COOTDTYThe valve is a replacement for the traditional float, which can be used for various high water water systems, swimming pools, water towers of industry and civil construction, etc. Automatic control, low self-replenishing water, water fully automatic stopFour inlets, large water volumeBeautiful appearance, small size, practical, simple installationNo electricity, easy to use, long service life, low failure rate, saving water resourcesWorking pressure range: 1-10KG (0.1-1mpa)Application Medium: water cleaningSuitable temperature Medium: le; 70 °C High Temperature Resistance Average Temperature: 70 °C - 120 °C When the pool level or water tank drops, the valve body will fall, and then the control valve precursor will be opened. Because it affects the water pressure in the pipe, the sealing surface of the control valve will be opened. Finally, the water comes out and vice versa. Note: This production belongs to liquid level control valves. Once installed, the float must be vertical. If you want to install from the top, the elbow needed to connect the float valve and inlet pipe. Firstly, the supply line should be fixed in the horizontal plane, and then connect an automatic valve to adjust the water level at the water inlet according to the standard. The main water inlet should be lined with the normal diameter of the control valves. The ball valve should be open when in use. If two valves are installed in the same pool, the two valves should be kept in the same horizontal plane. Before installation, clean the debris in the pipes in case of blockage. If the water quality is not good, the valves must be properly maintained. If users find that the time of adding water becomes longer, they can just load the water inlet and wash it Material: Nylon PA66 + Food Grade RubberSize: 72x50x70mm Quantity: 1 PcNote: Please allow 1-3mm error due to manual measurement. Pls make sure you do not mind before you make a bid, due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Content:1 x Water Level Adjusting Valve
  • Fruugo ID: 397918466-848419493
  • EAN: 6935169992436

Παράδοση & Επιστροφές

Αποστέλλεται σε 5 μέρες

  • STANDARD: 7,43 € - Παράδοση μεταξύ Παρ 21 Νοεμβρίου 2025–Παρ 05 Δεκεμβρίου 2025

Αποστέλλεται από Ολλανδία.

Κάνουμε ό,τι καλύτερο μπορούμε για να εξασφαλίσουμε ότι τα προϊόντα που παραγγέλνετε αποστέλλονται σε εσάς πλήρως και σύμφωνα με τις προδιαγραφές σας. Παρ' όλα αυτά, αν παραλάβετε μία ελλιπή παραγγελία ή προϊόντα διαφορετικά από αυτά που παραγγείλατε ή αν υπάρχει κάποιος άλλος λόγος που δεν είστε ικανοποιημένοι με την παραγγελία, μπορείτε να την επιστρέψετε ολόκληρη ή κάποια προϊόντα από αυτή και να λάβετε πλήρη επιστροφή χρημάτων για τα προϊόντα. Προβολή πλήρους πολιτικής επιστροφών

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Κατασκευαστής:
Οι παρακάτω πληροφορίες αφορούν τα στοιχεία επικοινωνίας του κατασκευαστή του σχετικού προϊόντος που πωλείται στο Fruugo.

  • Zion Creative B.V
  • Zion Creative B.V
  • Herengracht 449A R13
  • Amsterdam
  • Netherlands
  • 1017BR
  • zioncreative01@outlook.com

Υπεύθυνος στην ΕΕ:
Οι παρακάτω πληροφορίες αφορούν τα στοιχεία επικοινωνίας του επευθύνου στην Ε.Ε. Ο υπεύθυνος είναι ο καθορισμένος οικονομικός φορέας που εδρεύει στην Ε.Ε. και είναι υπεύθυνος για τις υποχρεώσεις συμμόρφωσης που αφορούν το σχετικό προϊόν που πωλείται στην Ευρωπαϊκή Ένωση.

  • VAT SPEED SL
  • VAT SPEED SL
  • Calle Antonio Salvador N99.1
  • Madrid
  • Spain
  • 28026
  • services@vatspeed-eu.com