Generator Controller Automatic Start Generator Controller With LCD Display for HQM6120UN 8‑35V Item Type: Generator Controller Weight: 764g / 26.9oz Material: Plastic, Silicone Product Size: Approx. 21x16.5x4.5cm / 8.3x6.5x1.8in Waterproof Grade: IP65 Applicable Model: For HQM6120UN Applicable: Diesel generator set Alternator Frequency: 50Hz 60Hz 3 phase 4 wire 15V AC - 360 V AC (ph N) 3 phase 3 wire 30V AC - 620 V AC (ph ph) 1 phase 2 wire 15 V AC - 360 V AC (ph N) 2 phase 3 wire 15V AC - 360 V AC (ph N) Key Description: Stop or Reset key: In both manual/automatic mode, it is possible to stop the running genset. In the genset alarm state, any stop alarm can be reset. In shutdown mode, press this key for more than 3s to test if the panel light is normal (test light). During a shutdown, press this key again for a quick shutdown. Power On Key: In manual mode or manual test mode, press this key to start the stationary generator set. Manual key: Press this key to put the controller in manual mode. AUTO key: Pressing this key puts the controller into automatic mode. Closing and breaking key: In manual mode, press this key to close and break the switch. Confirmation key: Move the cursor in the parameter setting and confirm the setting information. Flip up or increase: Flip the screen to move the cursor up or increase the number of the cursor position in the parameter setting. Flip down or decrease: Flip the screen to move the cursor downward or decrease the number of the cursor position in the parameter setting. Menu key: Press this key to enter the setting menu, press this key again to return to the main interface.