Window Cleaner Robot Automatic Cleaning with Intelligent Path Planning 5600pa Suction Power Remote Control Window Washer GB Plug Item Type: Window Cleaner Robot Material: ABS+cloth+electronic components Robot Size: Approx. 290 x 144 x 120mm / 11.4 x 5.7 x 4.7in Adapter Output: DC24V/3.75A Main Unit Battery: Built in Lithium Battery 500mAh (Battery included with shipment) Remote Control Battery: 2 x AAA batteries (Battery not included with shipment) Rated Power: 90W AC Power Cord Length: Approx. 1.2m / 3.9ft DC Adapter Cord Length: Approx. 4m / 13.1ft Safety Rope Length: Approx. 4m / 13.1ft UPS Usage Time: Approximately 20 minutes Cleaning Speed: Approximately 4 minutes/1 ㎡ Maximum Working Window Size: Approx. 6 x 4m / 19.7 x 13.1ft Minimum Working Window Size: Approx. 0.35 x 0.35m / 1.1 x 1.1ft Suction Power: 5600 Pa Automatic Cleaning Modes: 3 Applicable Places: Household, Beauty Salons, Office Buildings, Shops, Clubs, etc. Product Description: This is a window glass cleaning robot. It features a vacuum motor that allows the robot to adhere to the glass surface and move freely on vertical glass surfaces. Equipped with an Uninterrupted Power Supply system (UPS) to provide power during power outages and prevent falls. The window cleaner robot has two cleaning wheels with functions of suction, movement, and cleaning. The cleaning wheels can adhere and move on vertical glass surfaces. The cleaning pads on the wheels are easy to detach, replace, clean, and reuse. Made from fine fiber cloth, the cleaning pads deliver excellent cleaning results. The robot is equipped with Artificial Intelligence (AI) for planning and automatic frame detection. It offers both automatic and manual cleaning modes, giving users control over the robot. Usage Guide 1. Make sure the robot is fully charged before use (LED green light on). When charging the built‑in battery, turn off the switch and connect the power adapter. The orange light indicates charging mode, and the green light indicates fully charged. 2. Check if the safety rope and buckle are damaged. Always secure the safety rope before use and attach the safety rope to a fixed device in the home. 3. Before use, make sure the cleaning ring is fixed on the cleaning wheel to ensure the robot's good vacuum suction and spray cleaning water as required. 4. When the window cleaning robot is working, it must be connected to the power adapter to function properly. How e: 2. Ensure the robot is securely attached to the glass and make sure the safety rope and power cord do not obstruct the robot's cleaning path. 3. Press the automatic cleaning button on the remote control, the robot will move from the bottom to the top of the window, then move in a zigzag motion from left to right, top to down for cleaning. After cleaning, the robot will return to the starting position at the bottom and make a "beep" sound. 4. If the robot stops in an inaccessible place, gently pull it back with the safety rope. 5. When disassembling the robot, please hold the safety rope with one hand, remove the robot with the other hand, and then turn off the power. Note: The robot must be connected to a power adapter to work properly! How to clean steps Step 1: If the glass is dirty or dusty, clean it in the first round with a dry mat (without spraying any water) in order to remove the dust from the glass. If water or detergent is sprayed on the cleaning pad during the first round of cleaning, the water or detergent will mix with the sand and dust, causing it to become mud. Step 2: Install a clean and dry cleaning pad on the cleaning ring, and make sure the cleaning ring is firmly installed on the cleaning wheel. Then spray a little water or cleaner (2 to 3 sprays) on a clean mat. It can't be too wet. A completely wet cleaning mat will affect the robot's operation. If there is sand or dust on the glass, spray water or detergent on the area, let the water or detergent soak the area, and wait 2 to 3 minutes before cleaning. Step 3: Replace a clean and dry rag and spray water or detergent on the edge of the cleaning pad to improve the vacuum suction of the robot, thereby improving the cleaning performance.