Features: 1. The CCD digital fill light image sensor is specially designed for the rear view of the car. It uses digital fill light and software technology to make the daytime image clear and the night low illumination. 2. Large viewing angle of 170, safer reversing 3. -30 C to +60 C temperature range, fully in line with automotive environment applications. 4. With reversing reference line (electronic ruler line), the obstacle distance is clear at a glance 5. Digital sensor chip processing, night vision effect is obvious 6. Factory tested by high-pressure water immersion test and 12-hour power-on aging test, multi-layer waterproof design, truly high-pressure rinsing and immersion waterproof 7. Installed at the rear handle and license plate lights, with self-tapping screws 8. The video cable is connected to the monitor, and the power cable is connected to the power supply of the taillight of the car. When the vehicle is reversing, the reversing monitoring system automatically starts working, and the situation behind the car can be clearly seen . Product parameters: Image sensor: PC7070 Pixel: 756*720 Image format: NTSC/PAL Diagonal viewing angle: 170 degrees Rated voltage: DC12V Protection level: IP67 Display size: 4.3 inches Display format: 16:9 power 3W Power: DC 6-32V Video: All the way to reverse the rear view input, all the way to DVD input, rear view priority Video input system: PAL/NTSC dual system automatic switching Reverse function: automatic switching between rear view and automatic wake-up function after connecting the camera The LCD monitor is small and convenient, the bracket can be moved up and down, and it can be adjusted according to the angle of view required by the customer. It can be made into a car monitor. Video format: NTSC\PAL automatic switching Display: 4.3-inch TFT-LCD digital screen Resolution: 480 (H) X 272 (V) Input voltage: DC6-32V Signal input: two video inputs, one way back, one channel can be connected to DVD and other videos Superhuman design, reversing automatic start, off-line self-power shutdown Precautions: 1. For the microelectronic products of this product, please install, operate and use according to relevant national standards. 2. Adapted to 12V automotive electrical systems, can not be installed in 24V electrical models. 3. For the continuity between the parts, please connect with the dedicated line provided immediately. 4. Care should be taken during installation to prevent flattening, puncture, cutting, and extension of each cable. 5. Please install and maintain the system when the power is off. 6. Daily maintenance and repairs are carried out by manufacturers or professionals. 7. This product is not connected to the car brakes and is only used for parking assistance. If there is a parking accident, the product manufacturer has no obligation to bear legal responsibility. Ultra-easy installation method: 1. First wire the cable, red is connected to the positive pole of the power supply, and the negative pole is grounded. 2. Install the camera and place the camera in the trunk. 3. Plug in the camera and plug in the monitor 4. Connect the power supply Easy to solve all your car installation problems in four easy steps _x000D_