1. The high temperature baking paint process is fashionable and elegant, which can protect the product from scratches and prevent the paint from falling off. 2. High quality 304 stainless steel material, one-piece thick casting, high pressure resistance, explosion-proof. 3. Pure copper ceramic valve core, high and low temperature resistance, corrosion resistance, high sealing performance, environmental protection and no leakage. 4. Standard gauge fine thread, standard connection gauge G1/2, tight CNC thread, well-stitched links, no slipping and no leaking. 5. Wide application, suitable for many occasions, such as kitchen, washbasin, toilet, water heater, etc. Specifications: Item Type: Angle Valve Color: Black Angle Valve Height: app.8.5cm/3.3in Joint Size: app.5cm/2.0in Thread Size: Approx.2cm/0.8 in Weight: about 136g / 4.8oz Body material: 304 stainless steel Drawer type: pure copper valve core Functional features: thickened one-piece casting Surface technology: black paint Connection gauge: standard gauge G1/2 Application : kitchen / bathroom / balcony, etc. Applicable water pressure: 0.05-1.5MPA Installation steps: 1. Lay the inlet pipe at a suitable height on the wall. 2. Wrap the wire around the PTFE tape, put it into the decorative cover and screw it into the water inlet pipe. 3. Use a screwdriver to insert the water outlet and screw the water inlet end into the wall-mounted water inlet pipe. 4. Connect the water source of the pipeline and check whether the threaded part is sealed. Package List: 1 x Angle Valve 1 x Gasket Note: Installation Precautions: 1. Before installation, drain the water to thoroughly rinse the sand and dirt in the water pipe to ensure that the pipe is clean; 2. Wrap an appropriate amount of PTFE tape on the front thread of the angle valve during installation to adjust the angle of use of the angle valve; 3. Tighten it clockwise by hand first, then use a sandblasting knife to insert the water outlet and turn it clockwise to tighten; 4. Do not use a wrench to block the threaded port of the angle valve to avoid damage to the product if installed incorrectly.