Temperature and Pressure Safety Valves (T/P Valves) 0.7 MPa = 102 PSI Detailed introduction: Temperature and pressure relief valves are suitable for use with various water heaters, including solar, electric, heat pump, and boiler systems. The valve automatically releases excess temperature and pressure, providing dual safety protection. It serves as a critical safety component for pressurized water heating systems. Features: Safety relief valves are commonly used to regulate pressure in boilers, domestic hot water storage tanks, and general water systems. When the system reaches the calibrated pressure, the valve opens to release pressure into the atmosphere, preventing dangerous overpressure conditions that could damage system components. Calibration pressure options: 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Pressure deviation: 0.015 MPa for pressures up to 0.5 MPa; 3% of set pressure for pressures above 0.5 MPa Technical specifications: Color: Gold Materials: - Body: 3/4 inch brass - Control spindle: Brass - Sealing gasket: Silicone gel - Spring: SUS304 stainless steel Nominal pressure: PN10 Temperature range: 5110 C Set pressure options: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Set pressure deviation: -10% to +5% of set pressure Set temperature: 99 4 C Inlet and outlet (middle): BSPP 3/4" x 3/4" Weight: 238 g Dimensions: 83 x 42 mm Package included: 1 x Pressure Relief Valve Note: This package includes only the items listed above. Other accessories shown in images are not included. Note: Lighting effects and monitor settings may cause slight variations in color representation between the product image and the actual item. Measurement tolerance is 13 cm.