Feature:1. It is equipped with nipple joint, which can be directly connected to water pipe or used with direct quick joint of water pipe2. High quality internal thread interface is made of copper, anticorrosion, durable, and will not rust.3. The water intake valve is designed with special technology, and the valve rod is easier to use, plug and play, pull and stop.4. It is used for underground water extraction, can be connected with various underground nozzles for sprinkler irrigation.5. The water valve can also be used connected with hose for vehicle cleaning and road cleaning, etc.Specification:Condition: 100% Brand NewItem Type: Water Intake ValveMaterial: PE+CopperColor: As shown in the pictureStyle: 5PCS/Set 1in 32mm DN25, 4PCS/Set G3/4in 25mm DN20(Optional)4PCS/Set G3/4in 25mm DN20 Valve Body Height: Approx.13.3cm / 5.2in5PCS/Set 1in 32mm DN25 Valve Body Height: Approx.14.5cm / 5.7inThread Specification:4PCS/Set: Valve body bottom female thread diameter is G3/4in, corresponding valve rod fitting thread is G3/4in male thread5PCS/Set: Valve body bottom female thread diameter is 1in, corresponding valve rod fitting thread is 1in male threadWorking Pressure: 100-250kPaApplication: Garden, agricultural irrigationWeight: Approx.295g~445g/10.4oz~15.7ozOperating Instructions: When the valve rod fitting is inserted into the valve body to be pulled out, it is necessary to press down to rotate the valve rod out..Package List:1 x Water Intake Valve3 x AccessoriesNote:1. The threaded end of the water intake rod is inserted into the valve body, and the threaded end is for water outlet. After connecting the nipple fittings of the joint, it can be connected with a soft plastic pipe, tied with a pipe clamp and iron wire, and is taking water.2. Slowly insert the water intake rod along the main valve body, and slowly rotate it in a clockwise direction, and the water intake valve will discharge. After the water is used, turn it counterclockwise and follow the chute to remove the water. good job.3. The valve body of the water intake valve is connected with the underground pipeline, and the valve seat is installed flush with the ground. When in use, open the upper cover, insert the cannula, and the valve will automatically open to connect to the water source and directly start sprinkler irrigation.4. The valve stem can lock the valve body.