Sturdy and durable: The foldable shelf bracket is made of high-quality stainless steel with a smooth surface to prevent scratches, offering good corrosion and rust resistance. The triangular design provides the most stable structure for a wall bracket.Space saving: The foldable shelf bracket attaches to the wall at a 90-degree angle and requires only one mounting surface, taking up minimal space. Simply press the release arm to fold the stand down, helping keep your room clean and tidy.Versatile uses: The folding stand is ideal for various DIY applications, including use in shops, workshops, boats, RVs, patios, caravans, bedrooms, kitchens, balconies, bathrooms, and more. It can also support bookshelves, kitchen shelves, and display units.Easy to install: The folding hinged bracket is simple to install and fold, allowing you to create a foldable shelf or wall-mounted folding table for your home or garage. Ensure the two folding consoles are parallel to each other and perpendicular to the wall for proper installation.What you get: 2 foldable shelf brackets. If you have any questions about the product, customer support is available to assist you.Specifications:Material: Stainless SteelInstallation method: Screw fixingColor: SilverDimensions: 30 x 12.8 x 2 cm / 12 x 5 x 0.8 inch (L x H x W)Weight (per piece): 340g x 2Max Load Weight: 75 kgPackage Contents: 2 heavy-duty folding brackets, 8 mounting screwsNote:1. The product does not include wooden boards.2. The product must be installed horizontally and securely to prevent loosening.3. When using, consider the maximum load capacity, wall thickness, and panel thickness to avoid overloading and potential damage to the wall or panel.4. The table width should not exceed 5 cm longer than the stainless steel support.5. The number of folding brackets can be increased based on the panel length, which helps enhance load capacity.How to install:1. Measure and mark the bracket position on the wall.2. Leave a 1 mm (0.04 inch) gap between the panel and the wall at the end closest to the wall.3. Mark the hole locations on the panel.4. Attach the bracket to the panel using the short screws.5. Use a level to ensure alignment, then mark the correct drilling positions on the wall.6. Drill holes at the marked locations.7. Insert the expansion tubes into the holes.8. Secure the bracket to the wall using the long screws.9. Lift the spring button and press down to fold the bracket flat.Note: All measurements are manually taken; please allow 13 cm variation. Due to differences in lighting and display settings, slight color variations may occur. Actual product received will prevail. Delivery quantity as shown in the main product image.