1、Standard thread design, clear and tidy without burrs, can quickly remove chips and achieve high-efficiency tapping. 2、The tap is a machine type, usually used for thread processing on ordinary lathes, drilling machines and tapping machines. 3、Made of tungsten steel material, which has high hardness and wear resistance, and is not easy to deform after long‑term use. 4、The tap has a nano-blue coating to improve oxidation resistance and provide insulation protection to further increase the service life. 5、Commonly used in bicycle repair, furniture assembly, machinery manufacturing and other fields. 1 x Thread Tap Item Type: Thread TapMaterial: Tungsten steelCoating: Nano blue coatingType: Thread Tap (Metric)Specification: M5Pitch: Approx. 0.8mm / 0.03inShank Diameter: Approx. 5mm / 0.2inThread Length: Approx. 21mm / 0.8inTotal Length: Approx. 60mm / 2.4inM6Pitch: Approx. 1.0mm / 0.04inShank Diameter: Approx. 6mm / 0.2inThread Length: Approx. 19mm / 0.7inTotal Length: Approx. 68mm / 2.7inM8Pitch: Approx. 1.25mm / 0.05inShank Diameter: Approx. 6mm / 0.2inThread Length: Approx. 23mm / 0.9inTotal Length: Approx. 72mm / 2.8inM10Pitch: Approx. 1.5mm / 0.06inShank Diameter: Approx. 8mm / 0.3inThread Length: Approx. 27mm / 1.1inTotal Length: Approx. 80mm / 3.1in