MCX Test Probe Hook, MCX Test Probe Hook for DS202 DS203 DS211 DS212 DSO201 DSO112A Mini Pocket Oscilloscope ZQSA2

16,19 €
ΔΩΡΕΑΝ Αποστολή:

MCX Test Probe Hook, MCX Test Probe Hook for DS202 DS203 DS211 DS212 DSO201 DSO112A Mini Pocket Oscilloscope ZQSA2

  • Μάρκα: Unbranded

MCX Test Probe Hook, MCX Test Probe Hook for DS202 DS203 DS211 DS212 DSO201 DSO112A Mini Pocket Oscilloscope ZQSA2

  • Μάρκα: Unbranded
Αρχική τιμή: 28,59 €
Τιμή: 16,19 €
Κερδίζετε: 12,40 € (43%)
Πωλήθηκε από:
16,19 €
ΔΩΡΕΑΝ Αποστολή:

Σε απόθεμα

Δεχόμαστε τους ακόλουθους τρόπους πληρωμής

Περιγραφή

Features Insulation Material: The oscilloscope MCX test probe hook is wrapped with ABS material, which is insulated and environmentally friendly. It is small in size, integrates various functions, and is easy to use. MCX Interface: The oscilloscope probe is a replaceable test hook with a long service life and high quality probe hook. The precision MCX interface adopts a direct plug-in connection, which is convenient and quick to connect or disconnect. Removable hook tip, hook is well protected by plastic casing. Humanized Design: The oscilloscope probe is safe and practical, and the MCX can replace the test hook, which is stable and reliable at the tip of the test point. Test hooks are used to test logic signals on the board, especially when components are close together and densely packed. Test clips with safety handles and compression springs are an excellent choice for oscilloscope probes. Standard Parameters: The attenuation ratio is 1:1, and the signal transmission ability is strong. Different colored marker rings help identify different channels. Cable length: 69cm / 27.2in, weight: about 18g, it is a very portable pocket test equipment. Wide Range of Application: This oscilloscope test hook is suitable for various types of mini oscilloscopes such as DS202, DS203, DS211, DS212, DSO201, DSO112A, etc. Specifically designed for virtual oscilloscopes. 1 MCX connector, 2 test probes for testing board logic signals. Features: 1. Precision MCX interface adopts push-in connection, easy and quick to connect or disconnect. 2. Wrapped with ABS material, insulated and eco-friendly. 3. With attenuation ratio of 1:1, it has strong signal transmission capability. 4. Applicable for various models of mini oscilloscope such as DS202, DS203, DS211, DS212, DSO201 and DSO112A. Specification: Interface Type: MCX Attenuation Ratio: 1:1 Voltage: 40V Impedance: 50Ω Material: ABS Color: Red + Black Cable Length: 69cm / 27.2in Weight: Approx. 18g Package List: 1 * MCX Connector 2 * Test Probes   Note: Please allow slight error due to manual measurement. Thanks for your understanding. Package List
  • Fruugo ID: 383713374-825919646
  • EAN: 9789622109285

Πληροφορίες για την ασφάλεια του προϊόντος

Δείτε τις πληροφορίες για την ασφάλεια του προϊόντος που περιγράφονται παρακάτω

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Ετικέτες ασφάλειας προϊόντων

CE Mark
Προειδοποιήσεις για την ασφάλεια: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
Συστατικά: As shown in the figure

Παράδοση & Επιστροφές

Αποστέλλεται σε 2 μέρες

  • STANDARD: ΔΩΡΕΑΝ - Παράδοση μεταξύ Δευ 06 Οκτωβρίου 2025–Παρ 10 Οκτωβρίου 2025 - ΔΩΡΕΑΝ

Αποστέλλεται από Κίνα.

Κάνουμε ό,τι καλύτερο μπορούμε για να εξασφαλίσουμε ότι τα προϊόντα που παραγγέλνετε αποστέλλονται σε εσάς πλήρως και σύμφωνα με τις προδιαγραφές σας. Παρ' όλα αυτά, αν παραλάβετε μία ελλιπή παραγγελία ή προϊόντα διαφορετικά από αυτά που παραγγείλατε ή αν υπάρχει κάποιος άλλος λόγος που δεν είστε ικανοποιημένοι με την παραγγελία, μπορείτε να την επιστρέψετε ολόκληρη ή κάποια προϊόντα από αυτή και να λάβετε πλήρη επιστροφή χρημάτων για τα προϊόντα. Προβολή πλήρους πολιτικής επιστροφών