Module 13.2 is a programmable power module. The module adopts STEP-DOWN step-down technology, supports DC 9-36V wide voltage input, built-in STM32 control processor and AD8418 high-resolution current amplifier, and achieves current and voltage output with rated output power of 100W ( 150W) through high-precision closed-loop control. It can output 0.5~30V/0~5A, and the readback accuracy is plus or minus 30mV/5mA. In addition, the isolation chips CA-IS3020S and B0505S-1WR3 integrated on the module provide electrical isolation of power supply and communication bus for the circuit. The output interface adopts a standard 4MM banana head socket with a positive and negative pole spacing of 19mm. The module is fully calibrated at the factory, and users need to purchase a DC power adapter separately for use. The module is suitable for scientific research experiments, industrial automation, embedded system development, and DIY projects of adjustable power supply. The maximum output value depends on the output capacity of the input DC power supply. Product features DC 9-36V wide voltage input, output 0.5~30V/0~5A High-precision rated output power 100W ( 150W) With electrical isolation safety performance Standard 4mm banana head socket, positive and negative pole spacing 19mm Applicable to Core/Core2/CoreS3 series hosts Applications Scientific research experiments Industrial automation Embedded system development DIY projects for adjustable power supply (The product printed words depending on the batch, but this does not affect use) Color: Red Material: plastic Package Contents: 1 x Module 13.2- Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.