Material: MS modified silane polymer Capacity: 12g Appearance: Paste (white Curing mechanism: moisture curing (relying on moisture in the ai r to promote curing) Face dry time: 20 minutes (spray a little water can accelerate the curing time) Follow-up operation: press tightly (fixed with auxiliary stickers or double-sided tape for more than 2 hours) Specific gravity (density): 1.52g/ml Hardness: 55% Maximum deformation: ±20% Elastic recovery rate: 80% Temperature (after curing): -45℃+90℃ Elastic modulus 100%: 3.0N/mm² Tear strength: 3.8N/mm² Tensile modulus at break: 200% Home Improvement: ceramic tile/glass/latex paint face/marble/granite/concrete face/gypsum board/rock wool/wood, etc. Metal: aluminum/steel/copper/iron/zinc, etc. Plastic: PC/PVC/GPPS/PMMA EVA/PET, etc. Environment: Humid environment (bathroom/kitchen), outdoor (anti-ultraviolet/low temperature), high temperature (automobile/industrial factory) Specifications: Widely used and easy to operate It has a waterproof effect, moisture resistance, cushioning and the like. Non toxic, solvent non-polluting, non-corrosive, anti aging Application: frosted glass, marble, lacquered wood, soft metal plates, tiles, mosaics. It is best to use an invisible wall mount. More sticky, no safer nails, high strength, quick-drying glue, no noise, environmentally friend