Description The single band 80m-10m end-fed half-wave wire antenna provides the antenna, which is designed as a highly portable wire antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feed line is essentially a balanced ground, so there is no need for a separate feed line The high-impedance half-wave line is matched to your 50 ohm feed point via an integrated impedance-matching toroidal transformer, rated at 10 watts. Further enlargement and reduction of SWR in the range of 80m-10m using high voltage capacitors on the transformer primary with specific radiator lengths. It is designed to be used without a tuner and has a SWR 1.2 for any part of the band after optimizing the driven components. Color: green Material: plastic + metal Package Contents: 1 x module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.