Condition: 100% Brand New Item Type: Sewing Awl Material: Beech Wood + Metal Weight: Approx. 81g-107g / 2.9oz-3.8oz Installation 1. Remove the 2 cone needles 2. Install the cone needle 3. Pass the thread through the tapered hole 4. Install the head 5. The length of the thread is slightly longer than the length of the suture 6. The cone needle passes through the front of the leather 7. Pull out the thread while pulling out the cone needle backward 8. The cone needle passes through the second hole 9. Pass the line through the hole in the picture 10. Tighten the thread at one end and pull out the cone needle at the same time 11. As shown on the back 12. Continue to thread as shown in the picture How to Use 1. Disassemble the stitching tool first 2. After splitting 3. Thread the needle upside down 4. After threading, the needle is drawn out from the top 5. Install the reel 6. Finalize Stitching: 1. Go straight through 2. Pull the line out 3. Through the second hole 4. Pay attention to threading, pass through here 5. Pull the needle out of the insertion position 6. Tighten both sides at the same time 7. Repeat the above 6 steps, the final effect is as shown above 1、DIY hand sewing device, using high?quality beech wood + metal materials, durable and wear?resistant. 2、The needle can be removed and replaced freely, suitable for DIY leather sewing. 3、Built?in thread reel design, smooth threading, reasonable traction of wax thread without tangling. 4、Leather sewing tool, suitable for repairing tents, backpacks, sleeping bags, saddles, seat belts, etc. 5、Built?in spool, prevent thread being scraped and broken, thread thickness is about 0.6mm, recommended to replace wax thread with a thickness of 0.6mm or more. 1 x Sewing Awl 1 x Straight Needle 1 x Elbow Needle 1 x Screw Fixing Head 1 x Manual