Due to the 360 detection angle, this mini motion sensor with PIR sensor is mainly installed in ceilings (flush-mounted). The range is 8 metres. The controller unit is IP20 protected and must be installed in a dry mounting area. On the side of the controller unit there are two mounting eyelets for screwing on. Convenient, automatic on/off of LED lighting systems. The light duration (5s, 30s, 1min, 3min, 5min, 8min) and daylight detection are set on the control unit. With the installation of motion detectors, you can fulfil further wishes in home automation for even more comfort in everyday life. In addition, they also increase the personal sense of security and deter burglars with motion sensors for e.g. LED lighting systems. Areas of use: outdoor (front door, yard, garden, garage entrance, etc.), living area, workshop, wet rooms (cellar, bathroom, etc.) or other monitoring areas. With the infrared motion detector, you can rely on proven technology for indoor monitoring. Protect areas in your home, provide automatic lighting in the office or as an ideal light extension in the basement. Thanks to the 360 working field and motion detection of up to 8 m, the possibilities are almost unlimited. Specifications - Voltage: 220-240V. - Rated load: 800 W bulb. - Rated load: 200 W LED and energy-saving bulbs. - Ambient light temperature: sensitivity adjustable 10-2000 lux. -Power off delay: 5 sec. / 30 seconds. / 1 minute. / 3 minutes. / 5 minutes. & 8 minutes. - Working range: 120/360. - Motion detection: up to 8 m. - Use: inside. -Humidity: <93% relative humidity (non-condensing). - Installation height: 2 m to 4 m. - Protection class: IP20