["IR Motion Sensor Switch on-off Touchless Infrared Human Body Hand Control Switches Cabinet Light Detector 110V 220V\n\nMotion Dection sensor for hand. Move hand before the detector the first time: lamps turn on, move hand befor the detector the second time: lamps turn off\n\nProduct Features:\n- EASY INSTALLATION\nElectrical motion sensor with the mini sensor for installation inside or outside furniture.\n- APPLICATION:\nPerfect to use in wardrobes, cabinets, closets, cupboards in the kitchen, bedroom, bathroom or living room.\n- OPEN/CLOSE DOOR - ON/OF\nWith this contactless switch, you can turn light (or electric circuit) on and off simply by moving the door.\nBy opening the door or cabinet front light goes on, by closing the door the is turned off. Reaction distance less than 8 for cm.\n- MOVE HAND - ON/OFF\nMotion detection sensor for hand.\nMove hand before the detector the first time: lamps turn on,\nMove hand before the detector the second time: lamps turn off\nThe perfect choice when your hands are wet or full of cookie dough and you need more light.\nSo the sensor works like a universal switch.\n\nSpecification:\nType: IR Sensor Hand Switch\nModel:JHL-H201\nRate Input Voltage: 85-250V AC\nRate Output Voltage: 85-250V AC\nDetection Range: Less Than 8cm\nPower Frequency: 50/60Hz\nRated Current: Max.2A\nAverage Load: Max.500W\nEnvironment Temperature: -20℃~55℃\nProtection: IP20\nThe Diameter of the Detector: approx. 15 mm\nCable Length: 30cm\n\nUsage:\n- Firstly,Punching a size hole on the installed panel,then put the inductive probe detector into the hole,tighten nut.Using glue to fix the nut to prevent it drop out after a long for time's transportation.\n- Secondly,After linking to the inductive probe detector,connect controller's output end without electricity(pay attention to L and N polarity),then link controller's input end(pay attention to L and N polarity).It can be used after checking the connection.\n\nPackage included:\n1 Set IR Motion Sensor Switch\n1 User Manual"]