DVB-S or S2 satellite meter WS-6933 High-quality pocket-sized, simple satellite signal meter model WS-6933 HD with color display LCD, allowing you to easily and precisely set the satellite antenna to the right satellite. The meter is equipped with a readable menu in Polish, has programmed several satellite positions (transponder satellites), there is a possibility of editing of each parameter. It has the ability to measure directly from the universal converter and converters type Unicable (8 editable SCR frequencies). An additional advantage is the BER error rate indicator and the built-in Li-Ion 800mA battery. Model WS-6933 HD has measurement of DVB-S2 channels - HD. Includes power supply and USB cable to connect to your computer. Menu in Polish. Main features: Input Frequency: 950-2150MHz Input signal level -65 - -25dBm Input Impedance: 75ohm Converter power supply: 13 or 18V (max. 300mA) DVB-S2 channel measurement (HD) Minimum noise level: about 35dbuV Maximum noise level: about 90 dBuV Converter surge protection Power level PWR, dBuV Indication of signal strength and quality Percentage indication of signal quality Sound signal to find the satellite (can be switched off) Indication of BER errors Built-in flashlight LI-ION battery (8,4V 800mAh), working time approx. 3 hours Ability to edit satellite, transponder, frequency DiSEqC support: 1.0, 1.1, 2.0 and 22 kHz UNICABLE or SCR support Possibility to update the software via USB connector Power supply: 100-240V or 50 or 60Hz 12V, 1000mA Power Consumption: 5W Dimensions: 160 x 80 x 40 mm Inputs or Outputs: Micro USB LNB Entrance DC Power Supply ( AC 100 -240V or DC 12V 1A) The set includes Meter WS-6933 HD USB cable Belt AC Charger Online instruction in Polish Packaging