Chlorine Test - Adjustment Points: Before next use, adjust the tester for the pool or hot spring water to be tested in the following order: 1. Use traditional liquid testing tools to test pool or hot spring water; 2. Record the chlorine reading for backup (1.5 PPM); 3. No pH adjustment is necessary. Finding the tester's adjustment point: A. Place one 1.5V AA battery (positive side up) in the battery compartment on the handle. B. Hold the tester in one hand and the test stick in the other. C. Insert the cleaned metal rod into the water to the black position. D. Gently stir the water with a metal rod. E. With the metal rod in the water, turn the knob on the front of the watch in the CL direction until it can no longer move. Then slowly turn it back to the right until the pointer points to the traditional position of the result measured by the liquid test tool (e.g., 1.5). F. Remove the test rod from the water, being careful not to move the knob. The pointer will slide to the right, to A A letter between E stops. This letter is the adjustment point. NOTE: The meter must be adjusted to the "adjustment point" before each chlorine test. Test pH: The recommended chlorine level for pool or spa water is 7.2 to 7.8 A) With the test stick still in the water, turn the knob in the pH direction until a beep sounds (the battery must be removed when reading the pH value). B) Wait until the pointer stops moving and take a pH reading. C) Gently dry the test stick, insert it into the slot next to the tester, and store it. Chlorine Content Test: The recommended chlorine level for pool or spa water is 1.2 to 1.7 ppm A) Move the pointer to the "set point" position. B) Holding the tester in one hand and the test rod in the other, insert the metal rod into the water to the black position. Wait until the pointer stops swinging to take the reading. C) Leave the test stick in the water and continue the pH test according to the instructions. Specification 1. Essential tools for swimming pools, saunas, and spas 2. The ideal tool for simply measuring the pH and C12 values of water 3. No chemical composition, no more guesswork 4. Chlorine level within the safe measuring range: 1.2 to 1.7 ppm 5. PH level within the safe measuring range: 7.2-7.8 6. Battery: Use 1 AA battery (battery not included) Widely Application: This pH meter is very suitable for various tasks, such as swimming pool, tap water, home brewing, laboratory testing, aquarium maintenance, etc. Electric tester for testing pH and chlorine (Cl2) levels in water. It is used to regularly monitor the pH and chlorine content of swimming pools, spas, and various water sources. Storage Method: In order to extend the life of the PC-101 pool tester and ensure measurement, Caution: 1. When not in use, please turn the knob to the off position (toward the PH direction until it can no longer move). 2. Store in a cool, dry place, avoid direct sunlight. 3. Do not immerse the test rod in liquids other than pool water and hot spring water. 4. Periodically check that the battery is fully charged - the tester uses one "AA" 1.5V alkaline battery Package List: 1 x Pool Water Quality Detector.becomeveryrich