PROGRAMMER FOR WATER IRRIGATION CONTROLLER CLOCK Feature: This timer can handle watering your garden. Ideal, when you are on vacation or during dry weather to manage your garden irrigation. With a timer, you can set your garden's irrigation program, so sprinklers and irrigation systems turn on automatically. It can run cycles at any time of the day or night, at any time, to make it easier to water your garden. Automatic watering: Our watering clock can water plants without people in your home and take care of them to improve plant survival. Specification: Material: ABS Color: as shown in the picture! Size: about 16,5 * 9,5 cm / 6,5 * 3,7 inch Diameter: approx. 8.5 cm /3.3 inch Suitable water temperature: 5-40 degrees Celsius Operating pressure: 0,0-4 kg Number of irrigation: (can be controlled by vortex switch), the specified mode still gives output, the minimum valve irrigation opening time is 1 minute, and the longest continuous irrigation valve opening time is 120 minutes. Irrigation cycle: (can be controlled by vortex switch), the specified cycle time is 1 hour, and the longest cycle is 72 hours. How to use: Insert the battery (the first time you insert the battery, the water valve will test once, and the ball will automatically go into the off state). When the vortex switch B is set to the desired cycle. Spinning switch to the desired point of continuous irrigation. The water valve operates automatically according to the set program within 10 seconds. List of packages: 1 x Irrigation Clock Note: The set cycle time shall not be less than the output time of the open valve. When the vortex switch B is set to 0, the water valve is turned on only once. When the vortex switch A is set to OFF, the water valve will close the valve.