Wind Generator Controller 12/24V 800W MPPT Wind Charge Controller for Wind Turbine System Automatically charges the battery Features an integrated rectifier and brake circuit module for improved heat dissipation and reliability compared to traditional designs Fully sealed waterproof design with IP67 protection rating, suitable for long-term operation in wet conditions Note: Ensure the wind turbine generator output voltage matches the battery rated voltage. Connect wires in the correct order: first connect the battery positive and negative terminals, then connect the three-phase output from the wind turbine. Always follow instructions when connecting the battery and wind turbine to the controller. Reversed polarity or incorrect connections may cause system malfunction or permanent damage to the controller. Wiring Instructions: 1. Connect the battery positive (red) and negative (black) terminals to the corresponding battery terminals on the controller 2. Connect the three-phase output wires from the wind turbine to the three-phase input (green wires) on the controller Specifications: - Maximum input AC voltage: AC35V - Output voltage: 12V / 24V - Battery charging cut-off voltage: 14.5V ± 0.3V / 29V ± 0.3V - Maximum charging current: 15A (12V), 10A (24V) - Wind generator speed limit voltage: 14.5V ± 0.3V / 29V ± 0.3V - Protection level: IP67 - Static power consumption: 0.008A - Maximum load power: 800W - Maximum allowable wind speed: 12 m/s - Operating temperature range: -35°C to +65°C - Input wiring: Three-wire system - Control mode: Auto-detect 12V/24V compatible - Installation: Bolted mount - Avoid reversing positive and negative connections to prevent damage Application: Wind charge controller Color: Blue Material: Aluminum alloy Package Includes: 1 x MPPT Wind Generator Controller Note: Lighting effects and display settings may cause slight color variations between the image and actual item. Measurement tolerance: ±1–3 cm