Features PROTECTION FUNCTION: Boost converter module supports reverse input protection with MOS to avoid faulty input cable and power burnout, etc.It is a non-isolated DC power conversion module. STABILIZED OUTPUT: High stabilization of output power, can convert 10-60VDC to 12-97VDC. When using the battery as an input, the low voltage protection will protect the module and battery from damage caused by excessive discharge. HIGH CONVERSION: The conversion efficiency of the voltage monitoring module is up to 97%; the boost conversion module consists of double hair magnet and 1.2mm copper wire. SMART TEMPERATURE CONTROL: Designed with an intelligent temperature control fan, it will automatically activate when the temperature reaches about 60°C. With thickened heatsink and intelligent temperature control cooling fan, it will automatically stop when the temperature is below 60℃. WIDE APPLICATION RANGE: Boost converter is widely used in high power solar street light drivers, various constant voltage LED lighting drivers, automotive and mobile power supplies, DIY adjustable constant voltage and constant current power supplies, solar charging and various battery loads. Specification: Input voltage: 10V DC to 60V Input Current: Input Voltage 10V‑30V Maximum current is 35A‑40A Input voltage 31-60V Maximum current is 30A‑35A Sleep current: 15mA (when converting 12V to 20V, higher output voltage will increase the sleep current) Output voltage: 12-97V continuously adjustable (can not be used to reduce voltage) Output Current: 22A (relative to the difference in input and output voltage, the higher the voltage difference, the lower the output current. Please improve the heat dissipation when the current exceeds 15A) Constant current range: 0.8‑22A(+/‑0.3A) Operating temperature: -40℃ to 85℃ (if the temperature is too high, improve heat dissipation) Frequency: 150KHz Conversion Efficiency: 92% to 97% (efficiency is related to input/output voltage, current and voltage difference. The smaller the difference, the higher the efficiency will be) Input Overcurrent Protection: Yes (protect automatically when the input is above 40A and the supply voltage will not increase) Installation Method: Four 3mm Spacers Wiring method: terminal blocks (use large current copper wire) Output power: Maximum output power = Input voltage * 30A (when input 12V, the maximum output power = 12V * 30A = 360W) (If input 24V, the maximum output power = 24V * 30A = 720W) Package List: 1 module Package List