Step 1 Choose the thimble you need to pull, connect the rotary lever, and tighten the screws. Note: there are thimbles with the platform; the screws should not be used. Step 2 Install the gear lever on the rotary bracket and place swimming boards. Step 3 Hook the motor on the swimming board and move it to pull out the thimble aligned with the motor shaft. Benefits - Enables controlled pulling of a thimble using a rotary lever and motor alignment. - Clear installation sequence from thimble selection to shaft alignment reduces the risk of misalignment. - Compact, integrated setup with a rotary bracket and gear lever for stable operation. Use scenarios - In a workshop setting when assembling or maintaining systems that use thimbles and require precise alignment with a motor shaft. - On a small production line where quick changeover of thimbles is needed, with a guided pulling action. - In field service where a portable setup is used to pull thimbles and align with a motor shaft on site. key attributes - Function: Pulls and aligns thimbles using a rotary lever, gear lever, and motor hookup on swimming boards. - Compatibility: Supports standard thimbles; note that thimbles with the platform do not use screws. - Size: Not specified in the description. - Material: Not specified in the description. - Performance: Designed to facilitate accurate pulling of the thimble by aligning with the motor shaft.