Universal Lambda Probe Emulator with regulation EM.031.1 Universal Lambda Probe Emulator for cars with different types of voltage (zirconia) and resistance (titanium) lambda probes: 1V (0. .1V, 1. .0V) 5V (0. .5V, 5. .0V) Thanks to the built-in potentiometer, it is possible to adjust the emulator to emulate any type of voltage probe. It is mainly designed to emulate the control probe (before the catalyst), but also in many cases, thanks to the adjustment, the diagnostic probe of the catalyst (after the catalyst). The task of the emulator is to prevent the petrol computer from registering incorrect mixture adjustment errors, lambda probe errors, faulty catalytic converter errors. The emulator replaces the signal from the lambda probe with its own signal, thanks to which the engine controller receives optimal information about the engine's operation. APPLICATION The emulator can be used in vehicles with or without LPG/CNG gas installation, in particular in vehicles with: defective factory lambda probe, a faulty, removed or low efficiency catalytic converter, and the engine computer displays the faulty (low efficiency) catalytic converter error, gas installation of the 1st, 2nd or 3rd generation, and in vehicles with manual adjustment of the gas supply (so-called screw). Where the engine computer lights up the "engine fault" indicator when it starts working on LPG, because the lambda probe mounted in front of the catalytic converter detects a too rich mixture. The emulator is designed specifically for the automotive market, it is resistant to high and low temperatures, humidity. ________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________