Reusable Concrete Paving Stone Mold Features: Material: PP Resin Size: 36x36cm Lays out the effect like blocks of stones So the path is more exotic, to create your own style of garden path. Color: Black DIY plastic molded paving mold is spread in Europe and America, is a personalized brick mold How to use this concrete paver mold to build the pathways: Step 1: Mix cement with water, according to package directions. When ready, the concrete will be a oatmeal consistency and thick enough to hold an edge when you slice into it with a shovel. Step 2: Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area. Step 3: Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles. Step 4: Following the contours of the mold, smooth out the concrete, wiping away any excess. Step 5: Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you're creating a curving pathway. Step 6: After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle Package Contents: 1 x Concrete Paving Mold