This is a DIY thermal rhinestone repair applicator that can create sparkling rhinestones for your items. It's small and easy to carry. The non-slip handle design is very user-friendly and provides a comfortable experience. The ergonomically shaped handle makes it easy to use. Equipped with a safety stand and 7 different applicator tips for applying heat-fix crystals in various sizes. You have various uses at any time. It only takes 2-3 minutes to heat up and is easy to use. Built-in thermostat, no temperature adjustment needed. With a power switch, easy to control and use. Usage: Suitable for all flat fabric materials, suitable for most types of crystals/rivets/beads. Product Specifications: Material: ABS shell Color: Purple Manual: 1. Insert the applicator and open it. Hold it for 2 minutes. 2. Place the tip with the stone on the stone and then pick it up. 3. Observe the glue until it becomes wet and shiny. Now you can apply the stone to the surface. 4. Gently press the applicator at a 90-degree angle to the surface. Move the applicator upwards and away. 5. If the stone is stuck to the tip, use tweezers to push it down into the groove in the tip to remove the stone. 6. If the stone is not properly glued, place the cap on the stone for a few seconds to melt the glue again. Delivery scope: 1 x Rhinestone Applicator 1 x Stand 7 x Interchangeable Precision Tips