This is a DIY heat fix rhinestone applicator that can make shiny rhinestones for your items. It is small and easy to carry. The non-slip handle design is very user-friendly and brings you a comfortable experience. The ergonomic handle makes it easy to use. Equipped with a safety bracket and 7 different applicator heads for applying heat fix crystals of different sizes. You have different uses at any time. It only takes 2-3 minutes to preheat and is easy to use. Built-in thermostat, no need to adjust the temperature. With switch, easy to control and operate. Application: Suitable for all flat fabric materials, suitable for most types of crystals/rivets/beads. Product Specifications: Material: ABS shell purple How to use: 1. Insert the applicator stick and turn it on. Keep it for 2 minutes. 2. Put the point with the gem on the gem and pick it up. 3. Watch the glue until it becomes wet and shiny. Now you can apply the gem on the surface. Depending on the size of the rhinestone, it may take about 5 seconds or more. 4. Gently push the applicator at a 90-degree angle to the surface. Move the applicator up and away. If the gem is stuck to the tip, use tweezers to push it down into the groove in the tip to remove the gem. 5. If the gem is not properly glued, place the end cap on the gem for a few seconds to melt the glue again. Scope of delivery: 1 x rhinestone applicator 1 x holder 7 x interchangeable precision tips