Mount directly in the chuck of any cordless or electric drill.With a flexible drive, you can take your power tool to the hardest to reach.Can be used with polishing kits, drill bits, wire brushes, countersunk holes, flap wheels, mounting stones and grinding wheels .Comes with a 3mm chuck.Universal flexible shaft, collet with 5mm trail diameter availableAs long as you can clamp a 3.2mm rod on your drill, you can use it.The flexible shaft has a total length of about 1.1m.Weighs about 240gRod diameter: 3.2mmInstall the rotating tool to unscrew the collar, loosen the collet nut, insert the shaft into the collet, tighten the collet nut, and screw the flexible shaft onto the rotary tool.To insert or replace the rotary cutter head, locate the hole in the handle, align the hole with the hole in the shaft, insert the shaft of any spare drill bit, loosen the chuck nut, insert the drill bit you want - use, tighten the chuck Nut.After tightening the drill bit and tightening the nut, remove the spare drill bit that locks the flexible shaft in place.Easy to use, with just a rotating tool for greater precision and control.Color: picture colorMaterial: metal + plasticPackage Content: 1* Universal Flexible ShaftOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.