3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for fast and efficient heating. Suitable for use in bathtubs, buckets, inflatable swimming pools, fish tanks, plastic barrels, and other water containers. To use, ensure the water level is at least 25 to 30 cm deep so the heater can be fully submerged. The device will naturally float on the surface; adjust the power cord to position it correctly. The heating element must always remain completely submerged during operation to prevent damage. For inflatable or thin-walled containers, place a ceramic tile or similar non-conductive material under the heating pipe to prevent direct contact with the container surface. Once the container is filled with water, place the heater inside and plug it in. The indicator light will turn on, and small bubbles will form around the heating element as it begins to warm the water. For large volumes of water, unplug the unit halfway through heating to check the temperature. When the desired temperature is reached, unplug the power immediately and wait 20 seconds before removing the heater from the water. Do not touch the water during the heating process. Safety Notes: - Never operate the heater without sufficient water coverage. - Always unplug the device before touching the water. - The stainless steel heating element must be fully submerged at all times. - Do not allow human contact with water while the unit is powered. - Unplug the heater before removing it from the water. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Immersion Heater (Adapter included based on destination country)