Window Cleaner Robot 5600Pa Suction Smart Glass Cleaner Robot Automatic Remote Control Robot Window Washer for Home Office Building Beauty Salon Shop GB Plug Item Type: Window Cleaning Robot Size: Approx. 290x144x90mm / 11.42x5.67x3.54in Output Voltage: DC24V/3.75A Main Battery: Built in Lithium Battery 500mAh (Battery included in the shipment) Remote Control Battery: 2 x AAA Battery (Battery not included in the shipment) Rated Power: 90W AC Power Cord Length: 1.2m / 3.94ft DC Adapter Cord Length: 4m / 13.12ft Security Rope Length: 4m / 13.12ft UPS Operating Time: Approx. 20 minutes Cleaning Speed: Approx. 4 minutes per centiare Maximum Working Window Size: 6x4m / 19.69x13.12ft Minimum Working Window Size: 0.35x0.35m / 1.15x1.15ft Suction: 5600 Pa Automatic Cleaning Modes: 3 Application: for Home, Beauty Salon, Office Building, Shop, Club, etc. Description: This is a window glass cleaning robot. It has a vacuum motor that allows the robot to attach to the glass surface and freely move on vertical glass surfaces. It has an uninterrupted power system (UPS) that provides power during power outages to prevent falling. The window cleaning robot has two cleaning wheels with suction, walking, and cleaning functions. The cleaning wheels can attach and move on vertical glass surfaces. The cleaning pads on the cleaning wheels can be easily disassembled, replaced, cleaned, and reused. The cleaning pads are made of fine fiber cloth, providing excellent cleaning results. The robot features artificial intelligence (AI) that can plan paths and automatically detect window frames. It has automatic cleaning modes and manual cleaning modes, giving users control over the robot. How e 1.Plug in the power adapter, turn the robot on (blue LED) and make sure the motor is working, then stick the robot on the glass about 10cm away from the frame (for robot self test). 2.Make sure the robot is firmly fixed on the glass and make sure the security rope and power cord do not interfere with the cleaning way of the robot. 3. Press the auto clean button on the remote control and the robot will move from the bottom to the top of the window and then move in a jagged pattern, cleaning the window from left to right and top to bottom. After cleaning, the robot will return to its starting position at the bottom and make a "drop" sound. 4. If the robot accidentally stops in an inaccessible place, gently pull it back with the security cord. 5. When disassembling the robot, please hold the security cord with one hand and remove the robot with the other hand, then turn off the power. Note: The robot must be connected to the power adapter to work properly! How to Clean Steps Step 1: If the glass is dirty or dusty, please clean it with a dry pad (do not spray any water) during the first round in order to remove the dust from the glass. If you spray water or detergent on the cleaning pad during the first round of cleaning, the water or detergent will mix with the sand and dust and turn it into mud. Step 2: Install a clean and dry cleaning pad on the cleaning ring and make sure the ring is securely mounted on the cleaning wheel. Then spray a little water or detergent (2 to 3 sprays) on the clean pad. It should not be too wet. A completely wet cleaning pad will affect the Operating of the robot. If there is sand or dust on the glass, spray the area with water or detergent, let the water or detergent soak the area, and wait 2 to 3 minutes before cleaning. Step 3: Replace the rag with a clean, dry one and spray water or detergent around the edges of the cleaning pad to increase the robot's vacuum suction, thus improving cleaning performance.