1. As long as the following three conditions are met, you can easily configure your remote control within 2 seconds. Condition 1, the remote control can be used normally; Condition 2, clear the transmission frequency of the remote control; Condition 3, the remote control coding IC is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240, etc. 2. Please pay attention to the correct placement of the product before copying. The remote control and the copy type remote control should be placed side by side on the desktop. Press the right arrow key on the right side of the copy control. Do not let go. When you see the LED light goes out first and then goes out, it means that the copy state has been entered. Use your left hand to quickly press the corresponding button on the remote control. When you see the LED light of the copy remote control flashes quickly, the copy is successful. The method of multi-key copying is the same. 3. Clearing operation: Press the two buttons of the copy remote control at the same time (must be pressed at the same time to be effective). When you see the LED light turns on and then goes out, do not let go until the LED light flashes, indicating that the clearing is successful. After clearing successfully, press the button on the remote control, and the LED light will turn on and off. 4. If you accidentally clear the code of the remote control and want to restore it, press the two buttons at the same time and don't let go. When you see the LED light turn on and off, don't let go until the LED light keeps flashing, indicating that the recovery has been successful. 5. Small size, light weight, remote control range up to 50 meters.